Send Message

Carbon /Alloy steel pipes, ERW steel pipes, API 5L LSAW&SSAW, ASME B16.9/MSS SP-75 BW pipe fittings, ASME B16.5/16.47 steel flanges, ASME B16.11/MSS SP-97 forged fittings, Knife gate valves, Butterfly valves, Ball valves,Globe valves,API valves

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
Home News

Chemical and Tensile Requirements of ASTM A790 S32750

I'm Online Chat Now
Certification
China Hebei Lufeng Piping Equipment Co., Ltd. certification
China Hebei Lufeng Piping Equipment Co., Ltd. certification
Company News
Chemical and Tensile Requirements of ASTM A790 S32750
Latest company news about Chemical and Tensile Requirements of ASTM A790 S32750
ASTM A 790 Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
 
This specification covers seamless and straight-seam welded ferritic/austenitic steel pipe intended for general corrosive service, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures.
 
UNS number: S32205 (Ferritic/Austenitic steel)
 
Manufacture
The pipe shall be made by the seamless or an automatic welding process, with no addition of filler metal in the welding operation.
At the manufacturer’s option, pipe may be either hot-finished or cold-finished.
The pipe shall be pickled free of scale. When bright annealing is used, pickling is not necessary.
 
Heat Treatment
Temperature: 1025-1125 °C
Quench: rapid cooling in air or water
 
Chemical requirements, %,
C: ≤0.030
Mn: ≤1.20
P: ≤0.035
S: ≤0.020
Si: ≤0.80
Cr: 24.0-26.0
Ni: 6.0-8.0
Mo: 3.0-5.0
N: 0.24-0.32
Cu: ≤0.50
 
Tensile requirements
Tensile Strength: ≥800MPa
Yield Strength.: ≥550MPa
Elongation in 2 in. or 50 mm, %: ≥15
Hardness:
HBW: ≤300
HRC: ≤32
 
Each tube shall be subjected to the nondestructive electric test or the hydrostatic test.
 
Permissible Variations in Wall Thickness
The minimum wall thickness at any point shall not be more than 12.5 % under the nominal wall thickness specified.
 
NPS Over, mm Under, mm
1⁄8 –1 12, incl 0.4 0.8
Over 11⁄2 to 4, incl 0.8 0.8
Over 4 to 8, incl 1.6 0.8
Over 8 to 18, incl 2.4 0.8
Over 18 to 26, incl 3.2 0.8
Over 26 to 34, incl 4.0 0.8
Over 34 o 48, incl 4.8 0.8
Pub Time : 2023-07-28 15:07:19 >> News list
Contact Details
Hebei Lufeng Piping Equipment Co., Ltd.

Contact Person: Mr. Sam Cui

Tel: +86 130 3189 1590

Send your inquiry directly to us